HCI 2015
International

S014: Utilizing Traditional Wisdom and Technologies in Industry - I
Chair(s): Hiroyuki Hamada, Kyoto Institute of Technology, Japan
Room: SANTA BARBARA C

• EMG Activity Analysis of Expert Skills on Handheld Grinding Work for Metallographic Sample
  Takuya Sugimoto, Kyoto Institute of Technology, Japan; Hisanori Yuminaga, Kansai Vocational College of Medicine, Japan; Hiroyuki Nishimoto, Kyoto Institute of Technology, Japan; Akihiko Goto, Osaka Sangyo University, Japan.
  
• Difference in Polishing Process of FRP Between Expert and Non-Expert
  Takuya Sugimoto, Daiki Ichikawa, Hiroyuki Nishimoto, Kyoto Institute of Technology, Japan; Yoshiaki Yamato, Kure National Collage of Technology, Japan; Akihiko Goto, Osaka Sangyo University, Japan.
  
• Process Analysis of the Hand Lay-Up Method Using CFRP Prepreg Sheets
  Toshikazu Uchida, Hiroyuki Hamada, Kyoto Institute of Technology, Japan; Koji Kuroda, Future-Applied Conventional Technology Centre, Kyoto Institute of Technology, Japan; Atsushi Endo, Masakazu Migaki, Kyoto Institute of Technology, Japan; Junpei Ochiai, Uchida Co., Ltd., Japan; Tadashi Uozumi, Gifu University Composite Materials Center, Japan; Akihiko Goto, Osaka Sangyo University, Japan.
  
• Process Analysis of Expert and Non-Expert Engineers in Quartz Glass Joint Process
  Masamichi Suda, Kyoto Institute of Technology, Japan; Toru Takahashi, Akio Hattori, TECHNO-EYE CORPORATION, Kyoto, Japan, Japan; Yuqiu Yang, Donghua University, P.R. China; Akihiko Goto, Osaka Sangyo University, Japan; Hiroyuki Hamada, Kyoto Institute of Technology, Japan.
  
• An Investigation on Skillful Gel-Coat Techniques and its Application to Beginner's Application
  Erika Suzuki, Tetsuo Kikuchi, Kyoto Institute of Technology, Japan; Yuka Takai, Akihiko Goto, Osaka Sangyo University, Japan; Hiroyuki Hamada, Kyoto Institute of Technology, Japan.
  
• Effects of Quantified Instructional Tool on Spray-up Fabrication Method
  Tetsuo Kikuchi, Erika Suzuki, Kyoto Institute of Technology, Japan; Yiyi Zhang, Kyoto Institute of Technology, P.R. China; Yuka Takai, Akihiko Goto, Osaka Sangyo University, Japan; Hiroyuki Hamada, Kyoto Institute of Technology, Japan.
  
• Comparison of Eye Movement during the Polishing Process of Metallographic Sample between Expert and Nonexpert
  Takuya Sugimoto, Kyoto Institute of Technology, Japan; Yuka Takai, Osaka Sangyo University, Japan; Hiroyuki Nishimoto, Kyoto Institute of Technology, Japan; Akihiko Goto, Osaka Sangyo University, Japan.
  

Top

S035: Utilizing Traditional Wisdom and Technologies in Industry - II
Chair(s): Hiroyuki Hamada, Kyoto Institute of Technology, Japan
Room: SANTA BARBARA C

• Comparison of KEMOMI Technique between Master Craftsman and Unskilled Worker
  Shinichiro Kawabata, Kyoto Institute of Technology, Japan; Zhilan Xu, Kyoto Institute of Technology, P.R. China; Akihiko Goto, Osaka Sangyo University, Japan; Hiroyuki Hamada, Kyoto Institute of Technology, Japan.
  
• Light Transmission Properties of Insert Molded GFRPs with Different Crape Structure of Silk Fabrics
  Kiyoshi Fujiwara, Mazda Motor Corporation, Japan; Erika Suzuki, Tetsuo Kikuchi, Takashi Furukawa, Atsushi Endo, Kyoto Institute of Technology, Japan; Yuka Takai, Osaka Sangyo University, Japan; Yuqiu Yang, Donghua University, P.R. China.
  
• Colorimetry and Impression Evaluation of Insert Molded GFRP Plate with Black Silk Fabrics
  Kiyoshi Fujiwara, Mazda Motor Corporation, Japan; Erika Suzuki, Tetsuo Kikuchi, Takashi Furukawa, Kyoto Institute of Technology, Japan; Takahiro Suzuki, Osaka Sangyo University, Japan; Atsushi Endo, Yutaro Shimode, Kyoto Institute of Technology, Japan; Yuka Takai, Osaka Sangyo University, Japan; Yuqiu Yang, Donghua University, P.R. China.
  
• Improvement of Needle Bar in Textile Machine by Hitting Process
  Kontawat Chottikampon, Kyoto Institute of Technology, Thailand; Suchalinee Mathurosemontri, Hitoshi Marui, Kyoto Institute of Technology, Japan; Ryo Marui, Marui Textile Machinery Co.,Ltd., Japan; Hiroyuki Nishimoto, Hiroyuki Hamada, Kyoto Institute of Technology, Japan.
  
• “OMOTENASHI” in the Japanese Bridal Market
  Shigeyuki Takami, Aya Takai, Takami Bridal Co., Ltd., Japan; Takuya Sugimoto, Masamichi Suda, Hiroyuki Hamada, Kyoto Institute of Technology, Japan.
  
• An Investigation on Conversion from Tacit Knowledge to Explicit Knowledge in Hand lay-up Fabrication Method
  Tetsuo Kikuchi, Erika Suzuki, Kyoto Institute of Technology, Japan; Yuka Takai, Akihiko Goto, Osaka Sangyo University, Japan; Hiroyuki Hamada, Kyoto Institute of Technology, Japan.
  

Top

S058: Human Modeling of Traditional Arts and Technologies - I
Chair(s): Akihiko Goto, Osaka Sangyo University, Japan
Room: SANTA BARBARA C

• Factor of Feeling "Hannari" from Kimono Image
  Kumiko Komizo, Noriaki Kuwahara, Kazunari Morimoto, Kyoto Institute of Technology, Japan.
  
• Differences in How Long an Ikebana Work Lasts Depending on the Skill Used in Cutting Floral Materials
  Yuki Ikenobo, Kyoto Institute of Technology, Japan; Zelong Wang, Kyoto Institute of Technology, P.R. China; Yusuke Shiraishi, Ikenobo Origin of Ikebana, Japan; Akihiko Goto, Osaka Sangyo University, Japan.
  
• Evaluation of KIMONO Clothes in Kyo-Yuzen-Zome using Image
  Takashi Furukawa, Kyoto Institute of Technology, Japan; Yuka Takai, Osaka Sangyo University, Japan; Noriaki Kuwahara, Kyoto Institute of Technology, Japan; Akihiko Goto, Osaka Sangyo University, Japan.
  
• Electromyography Measurement of Workers at the Second Lining Pounding Process for Hanging Scrolls
  Yasuhiro Oka, Kyoto Institute of Technology, Japan; Yuka Takai, Akihiko Goto, Osaka Sangyo University, Japan; Hisanori Yuminaga, Kansai Vocational College of Medicine, Japan; Kozo Oka, Kyoto Institute of Technology, Japan.
  
• Researching Sounds Generated During the Second Lining Pounding Process
  Yasuhiro Oka, Kyoto Institute of Technology, Japan; Yuka Takai, Akihiko Goto, Osaka Sangyo University, Japan; Keisuke Ono, Kozo Oka, Kyoto Institute of Technology, Japan.
  

Top

S080: Human Modeling of Traditional Arts and Technologies - II
Chair(s): Akihiko Goto, Osaka Sangyo University, Japan
Room: SANTA BARBARA C

• The Relationship between Mechanical Properties and the Method Technique of GFRP Plate by Hand Lay-up Method: Effect of the Workers Experience
  Masakazu Migaki, Keisuke Ono, Ryo Takematsu, Yusaku Mochizuki, Kyoto Institute of Technology, Japan; Eijutsu Ko, Kyoto Institute of Technology, P.R. China; Daiki Ichikawa, Hiroyuki Hamada, Kyoto Institute of Technology, Japan.
  
• Process Analysis of Manufacturing of Sewing Scissors by All Forging Process and Understanding of Its Sharpness
  Yasuko Kitajima, Tokyo Ariake University of Medical and Health Sciences, Japan; Kazuki Kito, Nippon Institute of Technology, Japan; Masakazu Migaki, Kanji Matsumuro, Kyoto Institute of Technology, Japan; Yasuhiko Murata, Nippon Institute of Technology, Japan; Hiroyuki Hamada, Kyoto Institute of Technology, Japan.
  
• A Study of the Tacit Knowledge on the Design of Kimono Patterns from Japanese Painting
  Masashi Kano, Kano-ko, Ltd., Japan; Hiroyuki Akaji, Kano-Ko, Ltd., Japan; Noriaki Kuwahara, Hiroyuki Hamada, Kyoto Institute of Technology, Japan.
  
• Process Analysis of Kyo Karakami Manufacturing
  Seiji Senda, Karacho Co., Ltd., Japan; Erika Suzuki, Tetsuo Kikuchi, Mitsunori Suda, Kyoto Institute of Technology, Japan; Yuka Takai, Osaka Sangyo University, Japan.
  
• Research on the Performance of Three Tea Whisks of “The way of Tea” with Different Experience
  Soutatsu Kanazawa, Urasenke Konnichian, Japan; Tomoko Ota, Chuo Business Group, Japan; Zelong Wang, Kyoto Institute of Technology, P.R. China; Akihiro Tada, Kyoto Institute of Technology, Japan; Yuka Takai, Akihiko Goto, Osaka Sangyo University, Japan; Hiroyuki Hamada, Kyoto Institute of Technology, Japan.
  

Top

S103: Utilizing Traditional Wisdom and Technologies in Industry - III
Chair(s): Hiroyuki Hamada, Kyoto Institute of Technology, Japan
Room: SANTA BARBARA A

• Comparison of Braiding Skills between Expert and Non-Experts by Eye’s Movement Measurement
  Kontawat Chottikampon, Kyoto Institute of Technology, Thailand; Suchalinee Mathurosemontri, Hitoshi Marui, Porakoch Sirisuwan, Kyoto Institute of Technology, Japan; Akihiko Goto, Osaka Sangyo University, Japan; Tadashi Uozumi, Gifu University Composite Materials Center, Japan; Miyako Inoda, Makiko Tada, Hiroyuki Nishimoto, Hiroyuki Hamada, Kyoto Institute of Technology, Japan.
  
• Comparison Knitting Skills between Experts and Non-Experts by Measurement of the Arm Movement
  Kontawat Chottikampon, Kyoto Institute of Technology, Thailand; Shunyu Tang, Kyoto Institute of Technology, P.R. China; Suchalinee Mathurosemontri, Porakoch Sirisuwan, Miyako Inoda, Hiroyuki Nishimoto, Hiroyuki Hamada, Kyoto Institute of Technology, Japan.
  
• Expert vs. Elementary Skill Comparison and Process Analysis in VaRTM-Manufactured Carbon Fiber Reinforced Composites
  Yasunari Kuratani, Kyoto Institute of Technology, Japan; Kentaro Hase, Takahiro Hosomi, Tomoe Kawazu, KADO Corporation, Japan; Tadashi Uozumi, Gifu University Composite Materials Center, Japan; Akihiko Goto, Osaka Sangyo University, Japan; Hiroyuki Hamada, Kyoto Institute of Technology, Japan.
  
• Effects of Spray Gun Handling of Automobile Repair on Carrier of Car Mechanic
  Shigeru Ikemoto, Kyoto Institute of Technology, Japan; Kenta Morimoto, Yuka Takai, Akihiko Goto, Osaka Sangyo University, Japan; Hiroyuki Hamada, Kyoto Institute of Technology, Japan.
  
• EMG Activity of Arms Muscles and Body Movement during Chucking in Lathe between Expert and Non-Expert
  Porakoch Sirisuwan, Kyoto Institute of Technology, Japan; Hisanori Yuminaga, Kansai Vocational College of Medicine, Japan; Takashi Yoshikawa, National Institute of Technology, Niihama College, Japan; Hiroyuki Hamada, Kyoto Institute of Technology, Japan.
  
• A Study on Learning Effects of Marking with Highlighter Pen
  Hiroki Nishimura, Noriaki Kuwahara, Kyoto Institute of Technology, Japan.
  

Top

S149: Enhancing “human machine” behavior and performance: from human factors and ergonomic engineering to integrative bioengineering.
Chair(s): Didier Fass, LORIA, France ; Brian F. Gore, NASA, United States
Room: SANTA ANITA C

• Analyzing Requirements using Environment Modelling
  Dominique Mery, Universite ́ de Lorraine, France, France; Neeraj Singh, McMaster University, Canada.
  
• Towards a theory for Bio – Cyber Physical Systems Modeling
  Didier Fass, LORIA, France; Franck Gechter, UTBM, France.
  
• Semantically Integrated Human Factors Engineering
  Sébastien Mamessier, Airbus Group Innovations, United States; Daniel Dreyer, Matthias Oberhauser, Airbus Group Innovations, Germany.
  
• Toward a Model for Effective Human-Automation Interaction: The Mediated Agency
  Kevin Le Goff, ONERA Salon de Provence, France; Arnaud Rey, CNRS, France; Bruno Berberian, ONERA Salon de Provence, France.
  
• Inside the User’s Mind – Perception of Risks and Benefits of Unknown Technologies, Exemplified by Geothermal Energy
  Johanna Kluge, Sylvia Kowalewski, Martina Ziefle, RWTH Aachen University, Germany.
  
• A Bi-Level Optimization Approach to get an Optimal Combination of Cost Functions for Pilot's Arm Move-ment: The Case of Helicopter’s Flying Aid Functions with Haptic Feedback
  Sami Cheffi, Thomas Rakotomamonjy, Laurent Binet, Philippe Bidaud, Jean-Christophe Sarrazin, ONERA Salon de Provence, France.
  
• Human Machine Epistemology Survey
  Rémi Nazin, LORIA - Université de Lorraine, France; Didier Fass, LORIA, France.
  

Top

S150: Human Modeling of Traditional Arts and Technologies - III
Chair(s): Akihiko Goto, Osaka Sangyo University, Japan
Room: BEAUDRY A

• A Study on Characteristic of Calligraphy Characters-Part 1 Analytical method with computer technology
  Zelong Wang, Kyoto Institute of Technology, P.R. China; Issei Harima, Zenichiro Maekawa, Kyoto Institute of Technology, Japan.
  
• A Study on Characteristic of Calligraphy Characters-Part 2 Case of one Character of Calligraphy Letter “Kanji” and “Hiragana”
  Zelong Wang, Mengyuan Liao, Kyoto Institute of Technology, P.R. China; Kayo Yokota, Kyoto Institute of Technology, Japan; Riichi Hagihara, Hagihara sanngyo goshi com, Japan; Zenichiro Maekawa, Kyoto Institute of Technology, Japan.
  
• A Study on Characteristic of Calligraphy Characters-Part 3 Case of the writing paper with Calligraphy Letter works
  Zelong Wang, Kyoto Institute of Technology, P.R. China; Riichi Hagihara, Hagihara sanngyo goshi com, Japan; Zenichiro Maekawa, Kyoto Institute of Technology, Japan.
  
• Comparison of Description Skill on Characteristics of the Urushi Crafts Work between Expert Craftspeople and Non-expert Craftspeople
  Atsushi Endo, Kyoto Institute of Technology, Japan; Mari Shimode, Kansai University, Japan; Yutaro Shimode, Seishi Namiki, Noriaki Kuwahara, Hiroyuki Hamada, Kyoto Institute of Technology, Japan.
  
• Effect of Skill Level Difference in the Polishing Process of the Maki-e Making Technique
  Atsushi Endo, Kyoto Institute of Technology, Japan; Hisanori Yuminaga, Kansai Vocational College of Medicine, Japan; Chihiro Akatsuka, Takuya Sugimoto, Yutaro Shimode, Hiroyuki Hamada, Kyoto Institute of Technology, Japan.
  
• Study on Method of Observing Maki-e Crafts Work in Urushi Craftspeople
  Atsushi Endo, Noriyuki Kida, Yutaro Shimode, Kyoto Institute of Technology, Japan; Isao Oda, Kisarazu National College of Technology, Japan; Yuka Takai, Akihiko Goto, Osaka Sangyo University, Japan; Hiroyuki Hamada, Kyoto Institute of Technology, Japan.
  

Top

S170: Designing for assisted living to support the health and safety of aging seniors.
Chair(s): Anita Woll, University of Oslo, Norway
Room: SANTA ANITA C

• Later Life: Living Alone, Social Connectedness and ICT
  Alma Culén, University of Oslo, Norway.
  
• A Collaborative Change Experiment: Diagnostic Evaluation of Telecare for Elderly Home Dwellers
  Suhas Govind Joshi, Anita Woll, University of Oslo, Norway.
  
• A Mobile Visual Diary for Personal Pain Management
  Tor-Morten Grønli, Westerdals - Oslo School of Arts, Communication and Technology, Norway; Gheorghita Ghinea, Fotios Spyridonis, Brunel University, United Kingdom.
  
• Mobile Application to Aid in the Prevention of Pressure Ulcers
  Alvaro Lima, University of São Paulo, Brazil; Lara Araújo, Federal University of São Paulo – UNIFESP, Brazil; Isabel Italiano, University of São Paulo, Brazil; Luciano Araujo, Federal University of São Paulo – UNIFESP, Brazil.
  
• Balancing Power Consumption and Data Analysis Accuracy through Adjusting Sampling Rates: Seeking for the Optimal Configuration of Inertial Sensors for Power Wheelchair Users
  Tao Liu, Chuanwei Chen, Melicent King, Gang Qian, Jicheng Fu, University of Central Oklahoma, United States.
  
• Parameter Estimation from Motion Tracking Data
  Csaba Antonya, Silviu Butnariu, Transilvania University of Brasov, Romania; Horia Beles, University of Oradea, Romania.
  

Top

S171: Human Modeling of Traditional Arts and Technologies - IV
Chair(s): Akihiko Goto, Osaka Sangyo University, Japan
Room: BEAUDRY A

• Brain Activity Analysis on "Kana-ami" Making Process
  Zelong Wang, Kyoto Institute of Technology, P.R. China; Kenichi Tsuji, Toru Tsuji, Kanaami Tsuji, Japan; Yuka Takai, Akihiko Goto, Osaka Sangyo University, Japan; Hiroyuki Hamada, Kyoto Institute of Technology, Japan.
  
• Motion Analysis of Interval Time During "Kana-ami" Making Process
  Zelong Wang, Kyoto Institute of Technology, P.R. China; Kenichi Tsuji, Toru Tsuji, Kanaami Tsuji, Japan; Yuka Takai, Akihiko Goto, Osaka Sangyo University, Japan; Hiroyuki Hamada, Kyoto Institute of Technology, Japan.
  
• Numerical Analysis on "Kana-ami" Structure between Expert and Non-Expert
  Zelong Wang, Kyoto Institute of Technology, P.R. China; Kenichi Tsuji, Toru Tsuji, Kanaami Tsuji, Japan; Koji Ishizaki, Kyoto Institute of Technology, Japan; Yuka Takai, Akihiko Goto, Osaka Sangyo University, Japan; Hiroyuki Hamada, Kyoto Institute of Technology, Japan.
  
• Experience Factors Influence on Motion Technique of “The Way of Tea” by Motion Analysis
  Soutatsu Kanazawa, Urasenke Konnichian, Japan; Tomoko Ota, Chuo Business Group, Japan; Zelong Wang, Kyoto Institute of Technology, P.R. China; Thodsaratpreeyakul Wiranpaht, Kyoto Institute of Technology, Thailand; Yuka Takai, Akihiko Goto, Osaka Sangyo University, Japan; Hiroyuki Hamada, Kyoto Institute of Technology, Japan.
  
• Visual Evaluation of “The Way of Tea” based on Questionnaire Survey between Chinese and Japanese
  Soutatsu Kanazawa, Urasenke Konnichian, Japan; Tomoko Ota, Chuo Business Group, Japan; Zelong Wang, Kyoto Institute of Technology, P.R. China; Rutchaneekorn Wongpajan, Kyoto Institute of Technology, Thailand; Yuka Takai, Akihiko Goto, Osaka Sangyo University, Japan; Hiroyuki Hamada, Kyoto Institute of Technology, Japan.
  

Top

S193: Human Modeling for Quality Care - I
Chair(s): Noriaki Kuwahara, Kyoto Institute of Technology, Japan
Room: PALOS VERDES

• Development of a Self-Learning System for Chest Auscultation Skills using an RFID Reader for Nursing Students
  Mitsuhiro Nakamura, Tokyo Ariake University of Medical and Health Sciences, Japan; Kyohei Koyama, GOV Co. Ltd., Japan; Yasuko Kitajima, Jukai Maeda, Masako Kanai-Pak, Tokyo Ariake University of Medical and Health Sciences, Japan.
  
• Caregiver`s Eye Gaze and Field of View Presumption Method during Bathing Care in Elderly Facility
  Akiyoshi Yamamoto, Tatsunori Azuma, Henry Barrameda Jr., Super Court Co., Ltd., Japan; Noriyuki Kida, Kyoto Institute of Technology, Japan; Akihiko Goto, Osaka Sangyo University, Japan; Tomoko Ota, Chuo Business Group, Japan.
  
• Research of Work Climate at Nursing Home - From Job Separation and Management Capability Point
  Akiyoshi Yamamoto, Super Court Co., Ltd., Japan; Tomoko Ota, Chuo Business Group, Japan; Akihiko Goto, Osaka Sangyo University, Japan; Noriyuki Kida, Hiroyuki Hamada, Kyoto Institute of Technology, Japan; Henry Barrameda Jr., Tatsunori Azuma, Super Court Co., Ltd., Japan.
  
• The Transfer of Expertise in Conducting a Participatory Music Therapy during a Combined Rehabilitation-Recreational Program in an Elderly Care Facility
  Akiyoshi Yamamoto, Henry Barrameda Jr., Tatsunori Azuma, Hideaki Kasasaku, Kayoko Hirota, Momo Jinno, Maki Sumiyama, Super Court Co., Ltd., Japan; Tomoko Ota, Chuo Business Group, Japan; Akihiko Goto, Osaka Sangyo University, Japan; Noriyuki Kida, Noriaki Kuwahara, Hiroyuki Hamada, Kyoto Institute of Technology, Japan.
  
• Usefulness of Ikebana a Nursing Care Environment
  Yuki Ikenobo, Yusaku Mochizuki, Noriaki Kuwahara, Kyoto Institute of Technology, Japan.
  
• The Digital Reminiscence Method: Effects on Dementia in Japanese Day Care Centers
  Masayuki Nakamura, Takashi Yoshikawa, National Institute of Technology, Niihama College, Japan; Kayo Tanaka, Wagaya of the dementia-only day care center, Japan; Mengyuan Liao, Kyoto Institute of Technology, P.R. China; Noriaki Kuwahara, Kyoto Institute of Technology, Japan.
  

Top

S194: Ergonomic Assessments using Advanced Virtual Prototyping Technique
Chair(s): Satoshi Kanai, Hokkaido University, Japan
Room: SAN FERNANDO

• The Role of Virtual Ergonomic Simulation to Develop Innovative Human Centered Products
  Daniele Regazzoni, Caterina Rizzi, University of Bergamo, Italy; Giorgio Colombo, Polytechnic of Milan, Italy.
  
• Estimation of Arbitrary Human Models from Anthropometric Dimensions
  Yui Endo, Mitsunori Tada, Masaaki Mochimaru, National Institute of Advanced Industrial Science and Technology, Japan.
  
• Optimisation of Product's Hand-Handle Interface Material Parameters for Improved Ergonomics
  Gregor Harih, Matej Borovinšek, Zoran Ren, University of Maribor, Slovenia.
  
• Body Tracking as a Generative Tool for Experience Design
  Monica Bordegoni, Serena Camere, Giandomenico Caruso, Umberto Cugini, Politecnico di Milano, Italy.
  
• MoCap-Based Adaptive Human-Like Walking Simulation in Laser-Scanned Large-Scale as-Built Environments
  Tsubasa Maruyama, Hokkaido Univesity, Japan; Satoshi Kanai, Hiroaki Date, Hokkaido University, Japan.
  
• Estimating Ergonomic Comfort during the Process of Mechanism Design by Interaction with a Haptic Feedback-System - Evaluation of Simulated and Kinesthetically Displayed Mechanisms using the Haptic Feedback System RePlaLink
  Thomas Kölling, Michael Krees, Mathias Hüsing, Burkhard Corves, RWTH Aachen University, Germany.
  
• An Approach for Intuitive Visualization of Ergonomic Issues
  Walentin Heft, Michael Spitzhirn, Angelika Bullinger, Paul Rosenthal, Technische Universität Chemnitz, Germany.
  

Top

S213: Medical decision-making and applications
Chair(s): Min Soon Kim, University of Missouri, United States
Room: SANTA ANITA C

• Stepwise Formal Modelling and Reasoning for Insulin Infusion Pump Requirements
  Neeraj Singh, Hao Wang, Mark Lawford, Thomas Maibaum, Alan Wassyng, McMaster University, Canada.
  
• Usability of Mobile Applications Supporting Training in Diagnostic Decision-Making by Radiologists
  Min Soon Kim, Awatef Ben Ramadan, Martina Clarke, University of Missouri, United States; Mia Markey, University of Texas, United States; Kraig Lage, Michael Aro, Kevin Ingalls, Vivek Sindhwani, University of Missouri, United States.
  
• Formalizing The Cardiac Pacemaker Resynchronization Therapy
  Neeraj Singh, Mark Lawford, Thomas Maibaum, Alan Wassyng, McMaster University, Canada.
  
• Automatic Identification of Below-Knee Residuum Anatomical Zones
  Giorgio Colombo, Polytechnic of Milan, Italy; Giancarlo Facoetti, BigFlo s.r.l., Italy; Caterina Rizzi, Andrea Vitali, University of Bergamo, Italy.
  
• Modeling and Simulating Lifting Task of Below-knee Amputees
  Yan Fu, Shiqi Li, Huazhong University of Science & Technology, P.R. China; Qian Chen, Wei Zhou, Huazhong University of Science and Technology, P.R. China.
  
• A Mobile Application for the Stereoacuity Test
  Silvia Bonfanti, Angelo Gargantini, Andrea Vitali, University of Bergamo, Italy.
  

Top

S214: Human Modeling for Quality Care - II
Chair(s): Noriaki Kuwahara, Kyoto Institute of Technology, Japan
Room: PALOS VERDES

• Analysis of the Skills to Acupuncture
  Yoshio Ikai, Ikai Acupuncture and Moxibustion Clinic, Japan; Masakazu Migaki, Noriyuki Kida, Kyoto Institute of Technology, Japan; Hidehisa Iwamoto, Kure National College of Technology, Japan; Hiroyuki Hamada, Kyoto Institute of Technology, Japan.
  
• Influence of Proficiency on Eye Movement of the Surgeon for Laparoscopic Cholecystectomy
  Hisanori Shiomi, Shiga University of Medical Science, Japan; Masamori Notsu, Tomoko Ota, Chuo Business Group, Japan; Yuka Takai, Akihiko Goto, Osaka Sangyo University, Japan; Hiroyuki Hamada, Kyoto Institute of Technology, Japan.
  
• Exploring How People Collaborate with a Stranger: Analyses of Verbal and Non-verbal Behaviors in Abstract Art Reproduction
  Haruka Shoda, JSPS/Doshisha University, Japan; Tomoki Yao, Doshisha University, Japan; Noriko Suzuki, Tezukayama University, Japan; Mamiko Sakata, Doshisha University, Japan.
  
• Verbal and Nonverbal Skills in Open Communication: Comparing Experienced and Inexperienced Radio Duos
  Noriko Suzuki, Tezukayama University, Japan; Yu Oshima, Doshisha University, Japan; Haruka Shoda, JSPS/Doshisha University, Japan; Mamiko Sakata, Doshisha University, Japan; Noriko Ito, Doshisha Univerisity, Japan.
  
• Effective Design of Tradittonal Japanese tea ceremony in the Group Home for the Elderly with Dementia
  Teruko Doi, Noriaki Kuwahara, Kazunari Morimoto, Kyoto Institute of Technology, Japan.
  

Top

S229: Safety, accident prevention and emergency
Chair(s): Ronald Laurids Boring, Idaho National Laboratory, United States
Room: SANTA ANITA C

• Development of a 3D Finite Element Model of the Chinese 50th Male for the Analysis of Automotive Impact
  Huimin Hu, China National Institute of Standardization, P.R. China; Li Ding, Xianxue Li, Beihang University, P.R. China; Chaoyi Zhao, Yan Yin, China National Institute of Standardization, P.R. China.
  
• Biomechanical Analysis of Human Thorax and Abdomen during Automotive Impact
  Huimin Hu, China National Institute of Standardization, P.R. China; Li Ding, Xianxue Li, Beihang University, P.R. China; Chaoyi Zhao, Yan Yin, China National Institute of Standardization, P.R. China.
  
• Modeling of a Virtual Open Platform for Human Cranium Simulation
  Pedro Perestrelo, Maurício Torres, Pedro Noritomi, Jorge Vicente Lopes Da Silva, Centro de Tecnologia da Informação Renato Archer (CTI), Brazil.
  
• Anthropometric Casualty Estimation Methodologies
  Daniel Rice, Medhat Korna, TSE, Inc., United States.
  
• Human Performance Modeling for Dynamic Human Reliability Analysis
  Ronald Boring, Jeffrey Clark Joe, Diego Mandelli, Idaho National Laboratory, United States.
  
• Hybrid BFO-PSO and Kernel FCM for the Recognition of Pilot Performance influenced by Simulator Movement using Diffusion Maps
  Jia Bo, Shanghai Jiao Tong University, P.R. China; Yin-Bo Zhang, Shanghai Aircraft Design and Research Institute, P.R. China; Lu Ding, Bi-Ting Yu, Qi Wu, Shan Fu, Shanghai Jiao Tong University, P.R. China.
  

Top

S230: Human Modeling for Quality Care - III
Chair(s): Noriaki Kuwahara, Kyoto Institute of Technology, Japan
Room: PALOS VERDES

• Study of Caregivers’ Skills for Monitoring Senior Residents
  Mikako Ito, Kyoto Institute of Technology, Japan; Yuka Takai, Akihiko Goto, Osaka Sangyo University, Japan; Noriaki Kuwahara, Kyoto Institute of Technology, Japan.
  
• Analysis of Eye Movement of Caregiver Concerning on Transfer Operation
  Akihiko Goto, Osaka Sangyo University, Japan; Mengyuan Liao, Kyoto Institute of Technology, P.R. China; Yuka Takai, Osaka Sangyo University, Japan; Takashi Yoshikawa, National Institute of Technology, Niihama College, Japan; Hiroyuki Hamada, Kyoto Institute of Technology, Japan.
  
• Effect of Care Gesture on Transfer Care Behavior in Elderly Nursing Home in Japan
  Mengyuan Liao, Kyoto Institute of Technology, P.R. China; Takashi Yoshikawa, National Institute of Technology, Niihama College, Japan; Akihiko Goto, Osaka Sangyo University, Japan; Tomoko Ota, Chuo Business Group, Japan; Hiroyuki Hamada, Kyoto Institute of Technology, Japan.
  
• Study of Caregiver’s Waist Movement Comparison Between Expert and Non-Expert During Transfer Care
  Mengyuan Liao, Kyoto Institute of Technology, P.R. China; Takashi Yoshikawa, National Institute of Technology, Niihama College, Japan; Akihiko Goto, Osaka Sangyo University, Japan; Yoshihiro Mizutani, Kyoto Institute of Technology, Japan; Tomoko Ota, Chuo Business Group, Japan; Hiroyuki Hamada, Kyoto Institute of Technology, Japan.
  
• An Investigation of Caregiver’s Fatigue During Nursing Work in China
  Mengyuan Liao, Kyoto Institute of Technology, P.R. China; Yuqiu Yang, Donghua University, P.R. China; Yuka Takai, Osaka Sangyo University, Japan; Takashi Yoshikawa, National Institute of Technology, Niihama College, Japan; Akihiko Goto, Osaka Sangyo University, Japan; Ting Yang, Kyoto Institute of Technology, P.R. China; Tomoko Ota, Chuo Business Group, Japan; Hiroyuki Hamada, Kyoto Institute of Technology, Japan.
  

Top

S248: Advanced Applications of Intelligent Systems
Chair(s): Renran Tian, Indiana University - Purdue University Indianapolis (IUPUI), United States
Room: PALOS VERDES

• Single-Variable Scenario Analysis of Vehicle-Pedestrian Potential Crash based on Video Analysis Results of Large-Scale Naturalistic Driving Data
  Renran Tian, Indiana University - Purdue University Indianapolis (IUPUI), United States; Lingxi Li, IUPUI, United States; Kai Yang, Feng Jiang, Indiana University - Purdue University Indianapolis, United States; Yaobin Chen, IUPUI, United States; Rini Sherony, Toyota Motor Engineering & Manufacturing North America, United States.
  
• Driving-Behavior Monitoring using an Unmanned Aircraft System (UAS)
  Calvin Zheng, Andreina Breton, Wajeeh Iqbal, Ibaad Sadiq, Elsayed Elsayed, Kang Li, Rutgers University, United States.
  
• Real-time Static Gesture Recognition for Upper Extremity Rehabilitation Using the Leap Motion
  Shawn Gieser, University of Texas at Arlington, United States; Angela Boisselle, Texas Scottish Rite Hospital for Children, United States; Fillia Makedon, University of Texas at Arlington (UTA), United States.
  
• Moment Analysis of Virtual Human Joint Based on JACK
  Qianxiang Zhou, Qingsong Yin, Zhongqi Liu, Beihang University, P.R. China; Fang Xie, China North Vehicle Research Institute, P.R. China; Shihua Zhou, Astronaut Center of China, P.R. China.
  

Top

S249: Applications of anthropometry
Chair(s): Junmin Du, Beihang University, P.R. China
Room: SAN PEDRO

• The Experimental Research of the Thumb’s Comfortable Control Area
  Huimin Hu, China National Institute of Standardization, P.R. China; Junmin Du, Beihang University, P.R. China; Chaoyi Zhao, China National Institute of Standardization, P.R. China; Fan Yang, Beihang University, P.R. China; Linghua Ran, China National Institute of Standardization, P.R. China.
  
• Experimental Study on Grip Ergonomics of Manual Handling
  Aiping Yang, Guang Cheng, Wen-Yu Fu, Beijing Union University, P.R. China; Huimin Hu, Xin Zhang, China National Institute of Standardization, P.R. China; Chau-Kuang Chen, Meharry Medical College, United States.
  
• Correlation Analysis on the Main and Basic Body Dimension for Chinese Adults
  Huimin Hu, Chaoyi Zhao, Xin Zhang, Linghua Ran, Taijie Liu, China National Institute of Standardization, P.R. China.
  
• Study on the Body Shape of Middle-aged and Old Women for Garment Design
  Xiaoping Hu, Yan Zhao, South China University of Technology, P.R. China.
  
• Visual Comparison of 3D Medical Image Segmentation Algorithms Based on Statistical Shape Models
  Alexander Geurts, Georgios Sakas, TU Darmstadt, Germany; Arjan Kuijper, Fraunhofer / TU Darmstadt, Germany; Meike Becker, Tatiana von Landesberger, TU Darmstadt, Germany.
  

Top